Flonox-400-Fluid Loss-Cement Additives

The most important function of oil & gas well primary cementing is to isolate the various zones within the wellbore.
In others words, the cement must prevent fluids or gases in one particular zone from mingling with those of another. A properly designed and placed cement slurry accomplishes this by creating the necessary seal between the casing and the formation. The cement must prevent migration or fluid channeling throughout the cement.
Today’s well cement systems must perform in a variety of down hole conditions, from 0 °C – over 350 °C., and at bottom hole pressures in excess of 30,000 psi.
PEPCO has developed a complete line of cement additives, which modify the characteristics and performance of the cement slurry. This means that a slurry can be designed to function over the wide range of conditions that occur in the wellbore.

Flonox-400 fluid loss additive is a synthetic additive developed for temperatures from below 80°-400°F (27°-204°C) and for salt concentrations from zero percent to saturated salt concentrations. Flonox-400 has been environmentally approved (exhibits biodegradability, low toxicity, and low bioaccumulation potential). This additive works without building viscosity and has a slightly dispersive character, thus the cement slurry remains thin. This additive is available as an aqueous liquid with a 22% activity.