Lodens-290-Weighting additives-Cement Additives

The most important function of oil & gas well primary cementing is to isolate the various zones within the wellbore.
In others words, the cement must prevent fluids or gases in one particular zone from mingling with those of another. A properly designed and placed cement slurry accomplishes this by creating the necessary seal between the casing and the formation. The cement must prevent migration or fluid channeling throughout the cement.
Today’s well cement systems must perform in a variety of down hole conditions, from 0 °C – over 350 °C., and at bottom hole pressures in excess of 30,000 psi.
PEPCO has developed a complete line of cement additives, which modify the characteristics and performance of the cement slurry. This means that a slurry can be designed to function over the wide range of conditions that occur in the wellbore.

Lodens-290 cement additive is a special grade of diatomaceous earth with an extensive surface area. Lodens-290 additive helps decrease slurry density and increase slurry volume. It can be used at bottom-hole temperatures (BHTs) between 80° and 290°F (27° and 143°C). Typical additive concentrations are 10 to 40% by weight of cement (bwoc).